Neewer Q3 200Ws 2.4G TTL Flash With Diffuser and QPRO Trigger
Neewer Q3OverviewKey FeaturesCordless Wireless 2.4 GHz Monolight200W Flash with 5600K CCTFlash, Sync & Optical Slave Flash ModesHigh Speed Sync: 1/8000 secRecycling: 0.01 to 1.8 SecondFlash Duration: 1/220 to 1/15,380 SecondRechargeable Lithium BatteryIncl
Neewer Q3Overview
Key Features
- Cordless Wireless 2.4 GHz Monolight
- 200W Flash with 5600K CCT
- Flash, Sync & Optical Slave Flash Modes
- High Speed Sync: 1/8000 sec
- Recycling: 0.01 to 1.8 Second
- Flash Duration: 1/220 to 1/15,380 Second
- Rechargeable Lithium Battery
- Includes QPRO-S Trigger for Sony
- Includes Battery, Charger & Power Cable
- Includes Mounting Bracket & Carry Case
Featuring a 2.4 GHz wireless system with a range of up to 328′, theQ3 TTL Flash Strobe Kit with QPRO-S Trigger for SonyfromNeeweris a 200W flash strobe that features a 5600K color temperature and guide number of 190′. It is powered by a rechargeable battery and offers flash, sync, and optical slave flash modes S1 and S2. The Q3 is portable and compact enough for handheld operation.
It features a high-speed sync mode that works with shutter speeds up to 1/8000 second, offering flash durations from 1/220 to 1/15,380 second. Beside these impressive characteristics, Neewer manages to keep recycling times low at 0.01-1.8 seconds to capture peak action and every fleeting gesture. A carry case is included for storage and transport.
Q3 Flash Strobe
- Flash Modes: wireless off, TTL/M/MULTI
- Sync Modes: high-speed sync (up to 1/8000 seconds), first curtain sync, and second curtain sync
- Optical Alave Flash: S1/S2
- Delay Flash: 0.01 to 30 seconds
- Stroboscopic Flash: up to 90 times, 99 Hz
- Manual power in 8-stop range from 1/1 to 1/128 in 1/3 steps
- Flash Duration: 1/220 to 1/15,380 seconds
- Recycle Time: 0.01 to 1.8 seconds
- Flash Exposure Compensation (FEC): manual
- FEB: +/-3 stops in 1/3 stops increments
- 2.4 GHz wireless receiver with 32 channels, 5 groups (A, B, C, D, E)
- Runs on an included 14.4V, 3200mAh battery
- Housing Material: plastic and rubber
Mounting and Accesories
You can easily mount the Q3 on a light stand via a 1/4″-20 threaded mounting hole on both sides of the flash, which allows landscape or portrait orientation with the included mount bracket. The Q3 outputs the standard look of an on-camera flash that can be modified using the included softbox, or a separately available beauty dish or umbrella.
QPRO-S Remote for Sony Cameras
The QPRO-S Trigger supports the use of the Q3 with the TTL function of Sony cameras when paired via the built-in Neewer 2.4G wireless system. It features 5 groups and 32 channels, with a range of up to 328′.
Reviews
There are no reviews yet.